SCORE/CRUSH CUTTING SLEEVE
DRAWING No. 93-425 DATE: 1/26/96 DRAWN BY: D W Gailey
TOLERENCE ALLOWANCE (UNLESS OTHERWISE SPECIFIED):
FRACTIONAL DIMENSIONS +- 1/64 * DECIMAL DIMENSIONS +-.003 * ANGULAR DIMENSIONS +- 1/2
MATERIAL: 52100 Rc 62-64
Close this Window
HOW TO ORDER:
1. Specify dimensions A, B, and C.
2. Special sizes quoted upon request.
CK-1 Slitting Roll Sleeves are made from high carbon, chrome alloy steel, which hardens completely through the sections normally required for this service.
63-64 RC hardness is guaranteed. Repeated grindings will not expose soft areas, as is the case on sleeves which have been carburized or case hardened.
The bores and OD's of these sleeves are concentric within .001 total indicator reading. The ends are ground square with the axis.
Dusenbury
P/N |
Diameter
A |
Diameter
B |
Length
C |
272001
272002
272003
272004 |
4.002/4.003 |
3.0020/3.0025 |
8
9
10
11 |
|
|
|
12
13
14
15
16 |
272005
272006
272007
272009 |
6.252/6.253
|
5.0030/5.0035
|
8
9
10
11 |
|
|
|
12
13
14
15
16 |
272010
272011 |
9.312/9.313 |
8.2530/8.2535 |
10
11
12 |
Close this Window
|
